Wire Braided Dispensing Flammable Liquids Hose Meets or Exceeds En 1360: 2005

Basic Info

Model NO.	Dispensing Flammable Liquids Hose
Inner Tube	NBR
Reinforcement	One Braid of Steel Wire
Cover	NBR
Temperature	-40c~100c
Size	5/8", 3/4", 1"
Length	20m, 50m
Certification	Ce TUV ISO9001
Transport Package	Well Packed by Poly Stripes
Specification	CE SGS ISO9001
Trademark	PASSION
Origin	Zhejiang China
HS Code	40092100
Production Capacity	20000 Meters / Month

Product Description

 

Wire Braided Dispensing Flammable Liquids Hose meets or exceeds EN 1360:2005
Construction -

Tube: NBR
Reinforcement: Single High-strength wire braided.
Cover: NBR
Temperature: -40ºC to +100ºC
Color: Black, Blue, Red and Green etc
Application: For fuel dispensing pump applications, including gasoline, diesel, oxygenated fuels (up to a maximum of 15% oxygenated compounds), lubricating oil, and other mineral oil etc.
Standard length: 20m, 50m (Random Length)

Specification:

Inner Diameter		Outer Diameter	Working Pressure		Burst Pressure		Length	Measurement	Weight
inch	mm	mm	bar	psi	bar	psi	m	cbm/roll	kg/m
5/8''	16	26.5	30	450	120	1740	50	0.07	0.57
3/4''	19	28	30	450	120	1740	50	0.08	0.65
1''	25	36	30	450	120	1740	50	0.124	0.82

Technical information:
Rubber Content of "Paishun's Hose" - The NBR Content of Hose Inner Tube is 42% and 40% in Hose Outer Tube.
The High NBR Material Content makes the Hose has excellent "permeability", so the Hose is able to not " bulge" even being immersed in High grade gasoline after 72 hours.

The Electrical Conductivity of Hose Assembly - When our workers do the assembling, we'll make sure that the Connectors to be well connected to Hose Wire, to make sure the Hose has "stable conducting electrostatic property", we test the " Hose Electrical Conductivity" with Ammeter.

Pressure Test - Every batch Hose will be tested under the Test Pressure (10times higher than the Hose's W.P.) and keeps at least 3 minutes, this is to avoid any invisible holes appear on Hose.

The Wire we use - The tensile strength of Single Wire we use is 2750 Newton high strength wire, the wire diameter is 0.295mm.

 

The " TEST" we do for every batch of Hose:
1) Test the " adhesiveness" between wires and rubber. Every batch of wires will be tested.

2) Test the " break strength" of wire. The standard wire we use is 2750N, we will test the " strength " of every batch of wire.

3) Test the " Pressure" of Hose, evey roll of Hose will be tested.

4) Test the "rubber sheet break strength" and " rubber sheet elongation at break".

5) Test " rubber wear-resisting property "

6) Test " rubber aging resistance "

7) Test " ozone resistance ".

8) Test " low temperature resistance ".

9) Test " hose electrical conductivity ".

10) Test " bending properties".

11) Test " incombustibility".